Files
NeoTachyon/tests/heal_suppression.sh

192 lines
11 KiB
Bash

#!/usr/bin/env bash
set -eo pipefail
# Pins consequence suppression: while a root cause is being repaired, the
# healers for its downstream effects stand down.
#
# A dead WAN takes the proxy, DNS and the health check with it. Each has its own
# subscriber, and each used to conclude independently that a restart was in
# order — three repairs for one fault, none of which could work until the uplink
# came back. safe_proxy_restart()'s rate limit throttled the pile-up after the
# fact; nothing expressed that they were consequences.
#
# The failure mode this guards against is quiet: without suppression the router
# still heals, it just thrashes while doing it. Only a log read would show it.
ROOT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
TACHYON_LIB="$ROOT_DIR/tachyon/files/usr/lib"
WATCHDOG_UC="$TACHYON_LIB/service/watchdog.uc"
CONTROLLER_UC="$TACHYON_LIB/service/event_controller.uc"
fail() {
printf 'FAIL: %s\n' "$1" >&2
exit 1
}
# ── causality is expressed once ───────────────────────────────────────────────
# The bus already ranked healers by cause. Those ranks are named so the
# subscription priority and the suppression check cannot drift apart — a drift
# would either suppress nothing or let a cause suppress itself.
for c in 'PRIORITY_WAN = 10' 'PRIORITY_SINGBOX = 20' \
'PRIORITY_PROXY = 40' 'PRIORITY_DNS = 50'; do
grep -q "const $c;" "$WATCHDOG_UC" || fail "the causal rank '$c' is gone"
done
# The registrations must use the constants, not literals, or naming them buys
# nothing.
for reg in 'heal_wan_and_gateway", priority: PRIORITY_WAN' \
'heal_singbox_stopped", priority: PRIORITY_SINGBOX' \
'heal_proxy_connectivity", priority: PRIORITY_PROXY' \
'heal_dns_stall", priority: PRIORITY_DNS'; do
grep -q "$reg" "$WATCHDOG_UC" \
|| fail "a subscription re-hardcodes its priority instead of using the named rank: $reg"
done
# ── the root cause is claimed and released ────────────────────────────────────
# The general active_root_causes registry was replaced by two named deadline
# vars — WAN and sing-box are the only two causes ever claimed; proxy and DNS
# healers only need to know if either is active.
grep -q 'let wan_repair_until' "$WATCHDOG_UC" \
|| fail "wan_repair_until is gone; nothing marks a WAN repair as a root cause"
grep -q 'let singbox_repair_until' "$WATCHDOG_UC" \
|| fail "singbox_repair_until is gone; nothing marks a sing-box restart as a root cause"
grep -q 'function suppressed_by_root_cause(healer)' "$WATCHDOG_UC" \
|| fail "suppressed_by_root_cause() is gone; consequences no longer stand down"
# WAN deadline is set before ifdown, not after: ifdown is itself what makes the
# proxy and DNS probes fail, and those facts arrive while ifup is still running.
claim_line="$(grep -n 'wan_repair_until = time()' "$WATCHDOG_UC" | cut -d: -f1)"
ifdown_line="$(grep -n -m1 '/sbin/ifdown wan' "$WATCHDOG_UC" | cut -d: -f1)"
[ -n "$claim_line" ] || fail "heal_wan_and_gateway does not set wan_repair_until before ifdown"
[ -n "$ifdown_line" ] || fail "heal_wan_and_gateway no longer restarts the wan interface"
[ "$claim_line" -lt "$ifdown_line" ] \
|| fail "the WAN deadline is set after ifdown; the resulting proxy/DNS failures would not be suppressed"
grep -q 'singbox_repair_until = time()' "$WATCHDOG_UC" \
|| fail "heal_singbox_stopped does not set singbox_repair_until"
# ── every claim has a release path ────────────────────────────────────────────
# A deadline released only at expiry suppresses real faults for the full window.
# Both causes have a recovery fact that zeroes the deadline immediately.
grep -q 'wan_repair_until = 0;' "$WATCHDOG_UC" \
|| fail "the WAN deadline is never cleared on recovery"
grep -q 'singbox_repair_until = 0;' "$WATCHDOG_UC" \
|| fail "the sing-box deadline is never cleared on recovery"
# WAN_UP is new: probe_wan only ever published failure, so a recovered uplink
# was invisible.
grep -q 'WAN_UP: "wan.up",' "$CONTROLLER_UC" \
|| fail "EV.WAN_UP is missing from the event vocabulary"
grep -q 'bus.emit(EV.WAN_UP' "$CONTROLLER_UC" \
|| fail "probe_wan no longer publishes WAN_UP; the deadline could only lapse by expiry"
grep -qE 'subscribe\(EV\.WAN_UP, note_wan_recovered,' "$WATCHDOG_UC" \
|| fail "nothing subscribes to WAN_UP"
# ── a transient WAN glitch must not bounce the interface ──────────────────────
# probe_wan used to publish WAN_DOWN on a single miss; the healer's ifdown/ifup
# then really dropped the interface and its route, repeating every cooldown
# window — a self-inflicted flap every ~5 minutes (issue #31). The probe now
# counts consecutive misses, the heal renews gracefully first, and both honour
# recovery_bypass like every other probe/healer.
grep -q 'const WAN_FAIL_THRESHOLD' "$CONTROLLER_UC" \
|| fail "probe_wan has no debounce threshold"
wan_probe_body="$(sed -n '/function probe_wan()/,/^ }$/p' "$CONTROLLER_UC")"
echo "$wan_probe_body" | grep -q 'state.wan_fail_streak = 0;' \
|| fail "probe_wan no longer resets its miss streak on a healthy pass"
echo "$wan_probe_body" | grep -q 'state.wan_fail_streak++;' \
|| fail "probe_wan no longer counts consecutive misses"
echo "$wan_probe_body" | grep -q 'if (state.wan_fail_streak < WAN_FAIL_THRESHOLD) return;' \
|| fail "probe_wan publishes WAN_DOWN before the debounce threshold"
echo "$wan_probe_body" | grep -q 'if (setting("recovery_bypass", "0") == "1") return;' \
|| fail "probe_wan ignores recovery_bypass"
wan_heal_body="$(sed -n '/function heal_wan_and_gateway/,/^}/p' "$WATCHDOG_UC")"
echo "$wan_heal_body" | grep -q 'if (settings().recovery_bypass == "1") return;' \
|| fail "heal_wan_and_gateway ignores recovery_bypass; it was the only healer that could not be disabled"
echo "$wan_heal_body" | grep -q '/sbin/ubus call network.interface.wan renew' \
|| fail "heal_wan_and_gateway no longer tries a graceful renew before ifdown/ifup"
# ── no http/mixed inbound → the proxy probe must not declare it broken ───────
# proxy_port() used to fall back to the hardcoded 4534, so a config without
# any http/mixed inbound (economy mode, all mixed proxies off) measured a dead
# listener and the watchdog restarted sing-box every ~minute (issue #31).
proxy_port_body="$(sed -n '/^function proxy_port()/,/^}$/p' "$CONTROLLER_UC")"
echo "$proxy_port_body" | grep -q 'let port = "";' \
|| fail "proxy_port() still defaults to a fake port instead of signalling 'no proxy inbound'"
proxy_probe_body="$(sed -n '/function probe_proxy()/,/^ }$/p' "$CONTROLLER_UC")"
echo "$proxy_probe_body" | grep -q 'if (port == "") return;' \
|| fail "probe_proxy() probes a dead default port when the config has no http/mixed inbound"
grep -q 'if (proxy_addr == "127.0.0.1:") return;' "$WATCHDOG_UC" \
|| fail "smart-detect probes the empty proxy address when the config has no http/mixed inbound"
# ── the consequences actually check ───────────────────────────────────────────
for healer in heal_dns_stall heal_proxy_connectivity heal_proxy_health heal_dns_continuous; do
grep -q "suppressed_by_root_cause(\"$healer\")" "$WATCHDOG_UC" \
|| fail "$healer does not stand down for an active root cause; it would repair a consequence"
done
# ── a skip is logged, never silent ────────────────────────────────────────────
# "the watchdog did nothing" and "the watchdog deliberately stood down" look
# identical in a log that omits this.
grep -qE 'standing down, WAN repair|standing down, sing-box restart' "$WATCHDOG_UC" \
|| fail "a suppressed repair is now silent; the log cannot distinguish it from inaction"
# ── the suppression state machine behaves ─────────────────────────────────────
# watchdog.uc is a CLI module with no exports, so the block is lifted out of the
# source verbatim — extracted, not copied, so a change to the logic changes the
# test's subject too.
SUPPRESS_UC="$(mktemp "${TMPDIR:-/tmp}/tachyon_suppress_XXXXXX")"
trap 'rm -f "$SUPPRESS_UC"' EXIT
# log_message, as_string, sprintf are module-level in watchdog.uc, outside the
# block. They go in first so closures capture them correctly.
cat > "$SUPPRESS_UC" <<'PRELUDE'
let logged = [];
function log_message(msg, level) { push(logged, msg); }
function as_string(v) { return "" + v; }
function sprintf(...args) { return join("", args); }
PRELUDE
sed -n '/^const SUPPRESSION_DEADLINE/,/^\/\/ ─── Escalation ladder/p' "$WATCHDOG_UC" >> "$SUPPRESS_UC"
grep -q 'function suppressed_by_root_cause' "$SUPPRESS_UC" \
|| fail "could not extract the suppression block from watchdog.uc"
cat >> "$SUPPRESS_UC" <<'DRIVER'
let out = [];
// Nothing is being repaired: every healer runs.
push(out, "idle_proxy=" + (suppressed_by_root_cause("proxy") ? "skip" : "run"));
// WAN is being repaired. The proxy and DNS healers are downstream of it.
wan_repair_until = time() + SUPPRESSION_DEADLINE;
push(out, "wan_proxy=" + (suppressed_by_root_cause("proxy") ? "skip" : "run"));
push(out, "wan_dns=" + (suppressed_by_root_cause("dns") ? "skip" : "run"));
// WAN does not suppress itself (it IS the root cause).
// Both vars are in scope; singbox_repair_until is still 0, so only WAN fires.
push(out, "logged=" + (length(logged) > 0 ? "yes" : "no"));
// The uplink comes back: suppression lifts immediately, not at the deadline.
wan_repair_until = 0;
push(out, "released_proxy=" + (suppressed_by_root_cause("proxy") ? "skip" : "run"));
// A sing-box restart suppresses proxy/DNS, but not a WAN fault which must still
// be repaired.
singbox_repair_until = time() + SUPPRESSION_DEADLINE;
push(out, "singbox_blocks_proxy=" + (suppressed_by_root_cause("proxy") ? "skip" : "run"));
singbox_repair_until = 0;
// An expired deadline no longer suppresses.
wan_repair_until = time() - 1;
push(out, "expired_proxy=" + (suppressed_by_root_cause("proxy") ? "skip" : "run"));
print(join(" ", out) + "\n");
DRIVER
actual="$(ucode "$SUPPRESS_UC")"
expected="idle_proxy=run wan_proxy=skip wan_dns=skip logged=yes released_proxy=run singbox_blocks_proxy=skip expired_proxy=run"
[ "$actual" = "$expected" ] \
|| fail "root-cause suppression misbehaves
expected: $expected
actual: $actual"
printf 'heal suppression checks passed\n'